How To Use The Elevator

Mar 22, 2022

There are buttons inside and outside the elevator car, and there are generally two up and down buttons outside the car. There are several common buttons on the control panel in the car, such as intercom button, alarm button, floor selection button, door closing button, door opening button, etc.

1. The elevator is equipped with landing door, car running direction indicator light, mathematical display car, running position and call button at each service landing. When using the Summon button, press the up directional button upstairs and lift the directional button downstairs.

2. When the car arrives, the floor direction indicator will show the moving direction of the car. Passengers will enter the car after judging the desired direction and confirming that it is normal. Note the closing of the door leaf. Do not stop at the junction between the elevator door and the car door.

3. There are position indicators, control panels, door opening and closing buttons and floor selection buttons in the car. After entering the car, press the floor selection button to enter the floor. To close the door immediately, press the close button. The car platform position indicator shows that it has reached the platform and is ready to leave when the car door is open.

4. The elevator has a rated load of 13 people and cannot be overloaded. If you are overloaded, please quit.

5. Passenger elevators cannot be frequently used as freight elevators, and flammable and explosive items are not allowed to be shipped.

6. When the machine has an abnormal phenomenon or failure, you should keep calm, you can call the car rescue phone, do not open the door without authorization, and try to escape from the car.

7. Passengers are not allowed to rely on the door, smoking and littering are not allowed in the car, and the car is kept clean and hygienic.

8. Passengers should take care of the facilities, not just pressing buttons and prying doors.

9. Drivers should strictly perform their duties. During the operation of the elevator, they should not stay away from their posts. If they find faults, they should deal with and report them in time.

10. The driver is not allowed to repair, and the emergency stop button is used as a call signal to be eliminated before the normal practice begins; the maintenance speed is not allowed when the floor and doors are open; the trap door on the top of the car is not allowed to open; it is not allowed to ship over long at the maintenance speed Objects; manual car door switches are not allowed as start or stop functions; sudden changes in direction are not allowed during motion.

11. The driver should always check the operation of the elevator, contact maintenance regularly, and make maintenance records.

12. When the machine is stopped, the driver should stop at the base station, turn off all switches on the operation panel, and close the door. In case of a power outage notice, stop the machine in advance.